[Software] config fexfiles for opi plus and opi2 and opi-PC

fritz · Published in 2015-5-30 03:50:11

Edited by fritz at 2015-9-14 17:51

Well, I do not understand why these things are not published.

The configuration fexfile for OPI plus:
opi plus fexfile
The configuration fexfile for OPI2:
opi2 fexfile
The configuration fexfile for OPI-PC:
opi-PC fexfile

HOW TO:
Building script.bin
FEXGuide (not updated)

zhao_steven · Published in 2015-5-30 20:47:40

I'm very busy. I will release the source code. Thank you.

fritz · Published in 2015-5-30 23:22:29

OK no problem
continue with your good work

magicse · Published in 2015-7-31 05:36:32

fritz replied at 2015-5-30 17:22
OK no problem
continue with your good work

Pls help me. I have only analog Tv not hdmi. I try modify script.fex->script.bin for Opi2 after that copy to /dev/mmcblk0p1 but nothing only black screen

bhgv · Published in 2015-7-31 08:40:21

magicse replied at 2015-7-31 05:36
Pls help me. I have only analog Tv not hdmi. I try modify script.fex->script.bin for Opi2 after th ...

you can do yourself a cheap hdmi monitor using universal tv board (with hdmi input and lvds lcd output) and lcd screen from old notebook/monitor.
the total cost may be < $20.

magicse · Published in 2015-7-31 14:17:48

The best way setup script.fex )

nidea · Published in 2015-9-14 23:42:52

How can i modify this script.fex ? where is?

magicse · Published in 2015-9-16 03:15:47

nidea replied at 2015-9-14 17:42
How can i modify this script.fex ? where is?

First post of this topic. Simple download it.
After notepad++ under Windows and edit like simple txt file.

nidea · Published in 2015-9-17 02:02:55

magicse replied at 2015-7-31 05:36
Pls help me. I have only analog Tv not hdmi. I try modify script.fex->script.bin for Opi2 after th ...

Thank for coment

I have the same problem, have you fix it?

when i have archive.fex. Only have to convert in .bin and copy it in the first partition? (/boot) where there are a file called uImage?

magicse · Published in 2015-9-17 02:08:07

Edited by magicse at 2015-9-16 20:09

Q: How enable Tv out (CVBS) on Lubutnu?
A: In file /etc/modules add record for module tv.
In script.fex change disp_mode to 1 (Datashit for H3 - TCON1 for TV )
screen1_output_type    = 2
screen1_output_mode    = 11
tv_used             = 1
tv_dac_used          = 1
tv_dac_src0          = 0

http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=396#lastpost
Yes You are right in dir where already uImage

[Software] config fexfiles for opi plus and opi2 and opi-PC

Viewed section