Linux Distributions for Orange PI H3 boards

Andras · Published in 2015-10-9 15:19:39

makama80 replied at 2015-10-8 23:45
Count me also in for a 5 THz HexadecaZilla KillerCore, 4 TB RAM DDR9 memory and fiber optic network ...

Dont be silly, my goal was achievable, and also good for marketing. ODROID-XU4 contains 2GB ram and usb3 interface wich is really nice, ddr3 ram chips isn't to exensive so we could make a beter mini computer for affordable price.
Usb2 sata converter is a joke, so thast why we should use usb3 interface for hdd performance reason.

Andras · Published in 2015-10-9 15:21:13

Lack of ram causes kswapd0 trigger.

darqoq · Published in 2015-10-9 15:41:57

Edited by darqoq at 2015-10-10 04:07

@loboris:
module kernel sunxi-ir-rx.ko doesn't work in your image Debian_jessie_mini modprobe throws an error

sauberpauli · Published in 2015-10-9 23:18:59

@loboris:
1 wire support is amazing!

tested with 18DS20 TempSensor

[  84.108968] Driver for 1-wire Dallas network protocol.
[ 90.052218] W1_SUNXI: Added w1-gpio on GPIO-20
[  114.093276] W1_GPIO: added w1 master on GPIO20
[  114.126649] w1_master_driver w1_bus_master1: Family 28 for 28.021502f97fff.48

root@OrangePI:/sys/bus/w1/devices/28-021502f97fff# cat w1_slave
41 01 55 00 7f ff 0c 10 c2 : crc=c2 YES
41 01 55 00 7f ff 0c 10 c2 t=20062

very good AAA+++

Nickco43 · Published in 2015-10-10 03:29:26

This poped up after i logged into lubuntu.

pgauret · Published in 2015-10-10 10:51:49

Andras replied at 2015-10-9 15:21
Lack of ram causes kswapd0 trigger.

Nope. Plenty of RAM available and still having the kswapd0 issue. For me it is triggered when performing intensive I/O on my USB external hard drive.

loboris · Published in 2015-10-10 20:35:33

INFO

Kernel sources and Ubuntu/Debian building scripts are now available on github.

OrangePi kernel sources
Ubuntu/Debian building scripts

ralves84 · Published in 2015-10-11 03:16:15

@Loboris, this script to make the mali modules are fully working???

melanrz · Published in 2015-10-11 06:19:42

loboris replied at 2015-10-10 20:35
INFO

Kernel sources and Ubuntu/Debian building scripts are now available on github.

Thank you for your work,now i test new modules and post results.

BUGBEAR · Published in 2015-10-11 12:04:31

Edited by BUGBEAR at 2015-10-11 12:21

Hello ,
I installed Ubuntu Mate on orange pi plus , Copied it to emmc using btrfs file system.
After that Mate is only booting in terminal mode , It is not booting in desktop.Booting with SD card it boots in desktopAnd every time I run sudo I get "sudo: unable to resolve host OrangePI"

I am new to linux so please help me .