H3Droid - Android image developed specifically to work on Allwinner H3 devices

kotcza

sure, come to irc #h3droid @ freenode (using any irc client or https://h3droid.com/chat-with-us )

eemxas

egalax touchscreen calibration does not work. is there any way you can suggest?

kotcza

in 1.3.3 there are additional params for usbtouchscreen.ko, not perfect solution but at least workable. maybe someone will write droid app for that?

darthtony

it freezes on ORange Pi Lite.
i Click on one casual program it open the wifi configuration tab and it freezes

kotcza

darthtony replied at 2018-2-5 17:21
it freezes on ORange Pi Lite.
i Click on one casual program it open the wifi configuration tab and  ...

as usual, please mention:
- version of the h3droid
- source of the image
- sdcard model/size
- how do you power the board
- how are you cooling it
- exact steps to reproduce the situation

darthtony

kotcza replied at 2018-2-6 00:51
as usual, please mention:
- version of the h3droid
- source of the image

i suppose it is the 1.3.2 version because is the last and the only thing written is h3droid installer
-the source the link at the beginning of this thread
-microSD 10 class 32 GB kingston
-5v 3A charger
-for cooling just one heatsink on the H3 chip

pmpp

darthtony replied at 2018-2-5 19:05
i suppose it is the 1.3.2 version because is the last and the only thing written is h3droid instal ...

Hi, If you see standard network [ON] under wifi slider then turn it off and  wait  30 seconds before activating wifi. Once wifi is auth and has ip,  wait a bit and restart to permanently set it on.

rakovm

Hi there,
I have this issue... I am using Orange Pi Lite and the last version of H3Droid. All good, but i want to use also my external otg2ethernet so my connection will be faster. When i plug it, it shows that Ethernet is available but when i click on DHCP no IP is coming, so basically the DHCP Client is not communicating with that port. What is possible to be done? The otg2ethernet is working for sure because when i go to Libreelec is working like a charm.

Help guys!

pmpp

@rakovm, usbnet standard is supported and tested,  i don't know about otg2ethernet but if it is the same you may want "ifconfig eth0 arp up" from /data/rc.local or root shell (via ssh/adb/uart )

rakovm

Wow i think otg2ethernet is my terminology and basically its microUSB to ethernet adapter that i am plugging into the OTG port. I will try that command when i come back home and will let you know.