Problem with Orange Pi PC

melanrz

alexcom replied at 2015-10-15 17:44
Unfortunately Orange Pi boards have that problem with HDMI-DVI cable.
JFYI: If red led is burning th ...

My opi2 not working with hdmi2dvi but with hdmi2vga work great.

Harald

This is the (only) image I got to work  on my Opi-PC: (from loboris with thanks)
OrangePI-PC_Ubuntu_Vivid_Mate.img    prepared for OrangePI users, just copy to SDCard, no configuration needed !http://www.orangepi.org/orangepi ... p;extra=&page=1
With power connected, only the two ethernet LED are on.
Once booting starts, off mico SD, the red LED turns on.
Make sure you have at least 2A/5V to the round power connector; and a good Class 10 micro SD.
I have HDMI/HDMI cable to my monitor. I tried three HDMI/DVI adapters: none worked.

I cannot get Internet over wired Ethernet (LAN) to work, with a known good Router and cable..(both DHCP)
Any help appreciated

alexcom

This post has the solution that worked for HDMI-DVI cable issue.

zhangbuzheng

hi，中国友人

melanrz

http://www.orangepi.org/orangepi ... &extra=page%3D1

Ospree

Hi All,

try the instructions here: http://www.cnx-software.com/2015 ... development-boards/

I did followed and it worked for me. Just use a recent image as example the loboris image for ubuntu mint. Remember that you have to copy and rename the image and the script file for Orange PIi PC otherwise it may not work. I did not used the correct image the first time and I get only one USB port working and no Ethernet.

After the right image is installed it is working nice and the Ethernet get connected automatically to my wireless router. Unfortunately no WiFi yet but I am working on it. i am writing this from my OPI PC

If you do all this and it is still not working, maybe you are unlucky to have a defective board.

Ospree