My orange pi plus can't connect sata hdd.

garyang

wolftronics replied at 2015-5-23 21:04
it works for me ...
2.5 "hard disk to be 5v !!!
3.5 "hard disk to be 5v 12v !!!

How can you connect 3.5 HDD?
Would you like me to explain in more detail ?

wolftronics

garyang replied at 2015-5-27 18:03
How can you connect 3.5 HDD?
Would you like me to explain in more detail ?

orangepi  DC input jack 12v   +12v yellow

garyang

wolftronics replied at 2015-5-27 19:31
orangepi  DC input jack 12v   +12v yellow

Thanks for replay.

But, Orange pi and orange pi plus is a completely different system.
I tested the 3.5 HDD connected in Banana pi is very good.
Banana pi and Orange pi is almost same system.


Did you test the 3.5 HDD connected in orange pi plus ?

Niarbagem

I had connected 3.5 HDD in Orange Pi Plus (OPP).
Sata cable to HDD and OPP.
Power from external Power supply (old ATX 400W power supply), now i had received 12V/5V power supply "for surveillance cam" with no fan  model T-40 12 5 (such  igorpec).

miha

Hi,

You wrote that sata cable that you bought from aliexpress does not work with orange. http://www.aliexpress.com/item/F ... 01556_2_79_78_77_80,searchweb201644_5,searchweb201560_1

Is that so that only 3.5" HDD is not working and cable linked above should work OK with 2.5" HDD's?

And should this cable work with 2.5" 5 volt HDD's (or SSD's) when connected to Orange Pi Plus?
http://www.aliexpress.com/item/F ... 01556_2_79_78_77_80,searchweb201644_5,searchweb201560_1

Br
-miha

bronco

miha replied at 2015-12-1 19:54
Is that so that only 3.5" HDD is not working and cable linked above should work OK with 2.5" HDD's?

For 3.5" HDD you need 12V too. And the cable you linked to should work with a 2.5" disk. You just have to take care that you don't use cables advertised for LinkSprite (pcDuino) or CubieTech (Cubieboards/Cubietruck) since they share the same connectors but the polarity of the SATA-power connector is inverted there. Banana Pi/M1/M1+/Pro/M3 are compatible to Orange Pi +.

miha

bronco replied at 2015-12-1 20:19
For 3.5" HDD you need 12V too. And the cable you linked to should work with a 2.5" disk. You just h ...

Thanks bronco!

jacer

SATA works, just install NTFS-3g for read and write. Open Synaptic Package Manager and press CTRL+F, search for ntfs-3g and gparted.

Galeots

enable sata for orange pi plus 2 help my!